Black plastic Manual reset thermal breakers. Budget product. Pop-out reset button. Use where panel mounting not possible. 50mmx18mmx35mm
Thermal, automatic reset circuit breakers. Budget product. 12 or 24V, Zinc plated steel. A suitable alternative to a replaceable fuse. 50mmx18mmx35mm
Insulating cover suitable for manual and auto reset thermal circuit breakers 225000 to 225014.
Clear waterproof boot for the BEP Carling CLD curcuit breakers. Replacement part for boots as supplied standard with the breakers.
The BEP 706-2W circuit breaker module is an ideal 24h essential services module. Fitted with 2x10A CARLING CLB thermal push-to-reset breakers with waterproof boots.
The BEP 706-4W circuit breaker module has the same features as the 706-2W, but has 1x5A & 3x15A circuit breakers. It is suited to larger boats with more systems to protect.
Label set with 21 essential services labels.
The CLB Series miniature thermal reset circuit breakersare available in a range of current ratings up to 40A. Drill d13mm, protrusion 11mm, intrusion 48mm. Body 15mmW x 35mmH. Terminals 6,3 mm spade.
ETA 5700 Series thermal panel mount circuit breaker-switches for12/24Vdc. Quality breakers with a push on/push off action. Screw connections. Drill d10mm protrusion 17mm intrusion 56mm.Body 15mmWx29mmH.
Compact hydraulic circuit breakers that mount into a one hole d13mm cutout. Red paddle actuators and d4 screw terminals. Body 35mm
Carling Technologies A-Series hydraulic magnetic breaker switches with trip-free mechanism are temperature unaffected. Rated 80VDC&240VAC Cut d16mm, 51mmHx19mmWx52mmD M4 terminals.
The same breakers as above, but with black actuator levers.
These AIRPAX breakers are identical to the Carling A-Series breakers above, but the boss at the base of the actuator has a rounded profile. Interchangeable with the Carling breakers previously used.
The BEP 707 Circuit Breaker Module has 1x50A & 2x25A breakers to separate loads like waste systems and toilets from the main DC panel, avoiding voltage spikes.Ratings can be changed. 138mmx69mmx75mmH
The same breakers as above, but with red actuator levers.
These mounting plates are ideal for mounting A-frame circuit breakers into thick panels. Made from 3mm aluminium alloy coated with a durable slate grey two pack finish. Dimensions 67x95mm.
AIRPAX double pole hydraulic magnetic circuit breakers have the same properties as the single pole breakers above. One actuator for both poles. Cut d16mm 51mmHx39mmWx52mmD.
These Airpax double pole breakers are used in BEP panels as main circuit breakers. A trip coil ensures that the breaker trips if the polarity of the power feed is reversed, in compliance with AU/NZ 3004.
These breaker switches are dual pole versions of the single pole breakers above with 2 red actuators linked by a bar. Cut 2xd16mm@19mm pitch, 51mmHx39mmWx52mmD.
These breakers are unaffected by temperatures with trip-free mechanisms. Rated 80VDC&240VAC. Cut 19mmWx37mmH, body 19mmWx 63.5mmH, intrusion 63mm, 1/4-20UNC studs.
BEP uses the IUL range of large frame circuit breakers where current requirements are between 50A and 100A. They provide reliable circuit protection and accurate circuit control for equipment.
This enclosure has been machined to accept a single C-frame circuit breaker
Trip free manual reset with push to trip ignition protected IP66 breakers. 37mmWx56mmH. Front/rr mount protr. 25/14mm, intr. 20/31mm, cut d32mm, mount 2xd6@40mm.Terminals d5mm
BUSSMAN 185 Series panel mount, trip-free, manual reset push to trip single pole IP67 ignition protected thermal circuit breakers rated 30A-150A. 48mmW x 74mmH. Studs d6mm.
Bussmann switchable circuit breakers in modular BEP Contour lock housings for the protection of heavy duty circuits like winches and davits. 138mm x 69mm x 75mmH
The BUSSMAN 185 Series surface Mount Thermal Circuit breakers have the same characteristics as the panel mounted items above. d6 mm stud terminals on front face.
BUSSMAN 187 Series breakers are improved versions of the 185 Series breakers, with larger d8 terminals. Ignition protected, rated IP66.