3AG fast acting, F type glass fuses. Dimensions
In-line 3AG fuseholder with holder for spare fuse, black plastic with fitted cable. Suitable for light duty applications.
In-line 3AG fuseholder, black plastic with fitted cable. Suitable for heavier duty, higher current applications.
In-line 3AG fuseholder, waterproof, yellow plastic with fitted cable.
Panel mount 3AG fuseholders with low profile finger nut and rear hex-nut fixing, 6mm tin plated brass spade terminals perpendicular to axis. Dimensions
MINI Blade fuses 11mm x 4mm x 16mmh. Fast acting. Tin plated connector blades. Colour coded, transparent housing affords visible indication of blown fuses. Interrupt capacity 1000A, Vmax = 32V. MINI is a Littlefuse trademark.
Waterproof in-line fuseholder for 1 MINI blade fuse
Blade Fuseholder in-line waterproof, sealed, requires butt-spliced cable connection, cable 2mm.
The wires for this fully waterproof fuse holder for blade fuses are crimped onto terminals that are inserted into the holder with rubber seals. A lug is provided to bulkhead mount the holder.
This panel mount blade fuse holder with a cover allows for easy access to change fuses. 12V30A max. Cover included. 35x12mm cut 21x7mm intrusion 18mm protrusion16mm
Blade Fuseholders MTA, multiple fuses with clear cover and side cable entry to 6mm spade connections.
16 Fuse MTA Blade Fuseholder, bottom cable entry, crimp-on terminals, with clear cover
6 fuse BEP ATO/ATC-6W blade fuseholder on positive bus. Clear insulating cover with label set. Imax total 100A, Imax/circuit 30A. 6mm stud connection to bus, 4mm screw connections to circuits. 90mmWx 80mmHx47mmD
This Negative Bus uses the BEP Contour lock system to allow it to be joined to fuse holder 220470 to keep wiring tidy and conveniently located.Rated 100A
Blue Sea Systems ATO/ATC Blade Fuseholders, 6 or 12 pole. Clear insulating cover with recess to accept labels supplied. Imax total 100A, Imax/circuit 30A. Inlet 6mm stud , outlets 4mm screws.
MAXI-Blade Fuseholder in-line waterproof, sealed, requires butt-spliced cable connection, cable 8mm² or 16mm². Use 16mm² for fuses 40A to 60A.
The BEP 702MFH MAXI fuse holder with clear cover is an economical way of fusing heavy loads 30-80A. Fuse is clamped between tinned brass clamps for positive connection. 6mm studs. 71 x 53 x 36 mm
Blue Seas Systems MAXI-Blade Fuseholder, mountable with cover for termination. Screw down contacts for positive clamping of fuse. Dimensions 51mm x 36mm x 74mmh,
Midi or AMI strip fuses in ratings from 30A to 100A are ideal to protect medium current circuits. Clear window allows easy checking of condition. 41mm x 12mm x 8mm, holes d5,4mm @ 30mm pitch.
MTA MIDI fuseholder in housing. 5mm plated MS studs and lock-nuts, additional corrosion protection is recommended.
This fuseholder for MIDI fuses is fitted in line and has no mountings. Can be secured by fitting heatshrink over the holder once assembled. 43mm x 19mm x 18mm.
Waterproof fuseholder for 3 Midifuses + 4 ATO/ATC blade fuses, rated IP66.Inlet stud M8, Imax total 300A, Midi fuses total Imax 250A, Imax 200A/cct, stud size M8, Blade fuses total max 50A, 20A/cct
The MIDI Safety Fuse Block from Blue Sea Systems is ignition and ingress protected. Rated 200A. Dimensions 125mm x 39mm x 42mmh. M8 s/s studs and nuts.
MEGA, AMG or SEA fuses are high quality medium to high current strip fuses, featuring a clear window allowing the condition of the fuse to be checked at a glance. Dimensions 69mm x 19mm x 11mm. Mounting holes d8,6mm at 50,8mm pitch.
Holder with cover for Mega fuses. Stackable design. 87mm x 42mm x 39mm
MEGA fuseholder in housing by BLUE SEA SYSTEMS with clear insulating cover. Rated 300A. Dimensions 103mm x 37mm x 42mmh. M8 s/s studs and nuts.
ANL or lift-truck fuses protect high current circuits. Made in Germany . Window allows fuse checking. Swing out bolt connections allow fuse changing without removing fasteners or cable. Dim 82x19x11mm for studs d10mm @ 60mm pitch.
ANL
Versatile ANL fuseholder with a clear polycarbonate cover for fuses rated up to 300A. Designed for use with other modules in the BEP PRO INSTALLER range.
Versatile ANL fuseholder with a clear polycarbonate cover for fuses rated up to 750A. Separate studs for fuse and wire terminals. Designed for use with other modules in the BEP PRO INSTALLER range.
Innovative ANL through panel or bulkhead fuseholder with a clear polycarbonate cover for fuses rated up to 500A. Designed for use with other modules in the BEP PRO INSTALLER range.
Blue Seas Systems ANL lift-truck fuseholder with clear cover. Cover breakouts allow side cable access. M8 s/s studs. For fuses up to 300A. Dimensions 109mm x 37mm x 42mmh. M8 s/s studs and nuts.
Blue Seas Systems ANL lift-truck heavy-duty fuseholder with clear insulating cover. Fuse mount blocks tinned copper.Suitable for fuses up to 700A. 177mmx50mmx59mmh. M8 s/s terminals.
BUSSMAN T-Class heavy duty marine fuses for use in high current applications. Ideally suited for protection of inverters. Dimensions l=70mm, d33mm, mounting holes D10mm on 46,8mm pitch.
Versatile T-Class fuseholders with clear polycarbonate covers for fuses rated 225-600A. Designed for use with other modules in the BEP PRO INSTALLER range.
Blue Seas Systems T-Class heavy-duty fuseholder with clear insulating cover. Cover breakouts allow cable access from all sides. M8 s/s studs. Fuse mount blocks tinned copper. Rated 400Amax. 177mmx50mmx59mm
These Bussman thermal manual reset breakers fit into Auto Blade Fuse Type ATC fuseholders and offer a cost effective conversion to the convenience of circuit breakers yet maintain protection integrity.
