HELLA relays with built in fuse. Four terminal, plastic with standard 6mm automotive spade terminals and a 15A blade fuse.
HELLA change-over relays, plastic with five 6mm spade terminals. Change-over relays have both normally open and normally closed contacts.
HELLA change-over relays, plastic with five 6mm spade terminals. Change-over relays have both normally open and normally closed contacts. Diode protected from voltage spikes during switching.
HELLA medium current relays, four terminals, with 9mm spade terminals on switched circuit, 6mm terminals on controlling circuit.
HELLA high current relays, four terminals, 6mm screw terminals on switched circuit, 6mm spade terminals on controlling circuit.
Surface mounting socket for Hella four and five pin
Timer relay delays the breaking or making of a circuit. Adjustable delay of between 0 and 900s. Suited to applications such as electric toilets. Max switched current 20A. Connections 6mm spade
Digital timers with eight independent on-off settings. Each setting can be programmed with a full menu of selections - single weekday, 7day week, 5 day week only, weekend only, alternate days etc. Current draw 250mA. Switch 30Vdc/240V ac.
Solenoids, also known as contactors, perform same function as a relay. Ratings are continuous. Silver contacts have greater durability. Oil filling inhibits arcing, units must be mounted with the terminals down to immerse contacts.
Plasticised versions of the solenoids above to prevent rusting when mounted in corrosive environments. Made by Cole Hersee.
Change-over solenoids have both normally open and normally closed contacts.
The Ble Sea solenoid is rated for a continuous 450A and 2000A cranking. M8 studs, holding current 0.13A@12V, 0.07A@24V
Engine shut-down solenoid, pull-in, hold-in. 2 bolt mounting, 25mm pull stroke, pull current 41A, hold current 0,76A, pull force 49N, hold force 89N.
Motor reversing solenoids, suitable for winch motors. 236300 and 236301 are for series wound motors, ie three wires, 236010 is for permanent magnet motors, ie two or four wires.
Continuous rated polarity reversing contactors with copper or silver contacts. Ideal for permanent magnet motors.
HELLA relays with four 6mm terminals. Diode protection prevents the induced shut off voltage becoming high enough to cause damage to transistors and ICs.The DP 5pin versions have 2 switched terminals
