aquavolt ELECTRIC BOAT PARTS :: Aquavolt



BEP Gas Detector - One Remote Sensor 905001 is designed for an economic in- dash installation. Features include clearly visible LEDﾒs for safe and alarm mode, audible alarm with test function and output for external audio alarm. Supplied with a remote sensor (5 metre cable).

BEP Gas Detector - One or Two Remote Sensors

905002 has all the features of 905001 and is supplied with 1 sensor with an option to fit a 2nd sensor. Output for remote alarm and blower unit.

BEP Gas Detector - One or Two Remote Sensors & Valve Control

905003 has the same features as the 905002 and has the ability to switch a valve on and off. It is fitted with a unique ﾓpulse & holdﾔ circuit which will work in conjunction with any continuously rated 12V valve coil which is rated under 2 amps. It will pulse the coil with an initial 12 volts to energise the coil, then step down to 5 volts. This is sufficient to hold the coil engaged in the on position, with the advantage of reducing current draw and avoiding excessive heat.

BEP Gas Detector Integrated

These gas detectors are made by BEP in New Zealand. They will detect LPG, Petrol and CNG fumes and operate on 12 or 24V. 905000 is a self contained unit and is supplied with an integrated sensor. This would typically be installed low down on a wall in an engine compartment. Size H95mm x W107mm x D35mm.

CRUZPRO Gas Detector

The GD55 gas vapour monitor detects gas vapours at 25% of the concentration required for an explosion (LEL or Lower Explosive Limit). The alarm will continue to sound as long as the sensor detects a dangerous concentration of gas vapour. The GD55 uses new technology to lower the power requirements for the sensor and draws only 0.12A at 12VDC. A built-in self test checks the electronics, cables and sensor and reports any problems. The GD-55 comes with one LPG/Petrol sensor with 5 m of cable. Installation into a d55mm hole requires only a screwdriver. An instruction manual and all mounting hardware is provided. Each GD-55 is assembled and then tested with a calibrated gas to ensure accuracy of the alarm trip point.

Gas Shut-off Switch Panel

BEP Contour Matrix panel with rocker switch with LED indicator light for remote control of gas control valves.

Gas Solenoid Valves

Gas valve and regulator also compatible with gas detector 905003. Use only 12V valve together with these two parts, regardless of system voltage. Current draw 1 A, in hold mode this decreases to 0,2A.

Sensor for BEP Gas Detectors

Sensor for BEP gas detector