aquavolt ELECTRIC BOAT PARTS :: Aquavolt - Lamps LED Replacement Lamps



Bayonet base Corncob LED replacement lamps Corncob LED lamp replacements are fitted with 60 high tech surface mount LEDs (SMDs) in a radial pattern. BAY15D (d15mm double contact with offset pins) bases. Suited for 12V and 24V systems, can be dimmed. The Corncob is fitted with cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

Bayonet base PCB LED replacement lamps

One of the major differences between incandescent and LED lighting is that incandescent lights radiate light in all directions, whereas LEDs cast light out in just one direction. It is therefore important when fitting LED replacement lamps that they should be positioned in the light fitting so as to shine straight out of it. These PC boards are fitted with high tech surface mount LEDs (SMDs). They connect to 15mm bulb sockets via short flyleads. It is thus possible to plug in the base and then position the pcb such that the LEDs optimally shine out of the light fitting. Can be fixed in position with silicon adhesive or even Blue Tack. These are ideal for the traditional brass or stainless steel dome lights found on many boats. Available with BA15s (single contact) or BA15D (double contact) bases. Suited for 12V and 24V systems, can be dimmed. These PCB's are fitted with warm white (wwe) LEDs. Suitable for interior lights.

Bayonet base Tower LED replacement lamps

These Tower LED lamp replacements are fitted with high tech surface mount LEDs (SMDs). Available with BA9S (d9mm single contact), BA15s (d15mm single contact), BA15D (d15mm double contact) or BAY15D (d15mm double contact with offset pins) bases. Suited for 12V and 24V systems, can be dimmed. These towers are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

Dichroic LED replacement lamps - MR11

LED MR11 LED lamp replacements are fitted with high tech surface mount LEDs (SMDs). These lamps are suited to light fittings designed to have the MR11 dichroic quartz globes fitted to them. Suited for 12V and 24V systems, can be dimmed. These lamps are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

Dichroic LED replacement lamps - MR12

LED MR16 LED lamp replacements are fitted with high tech surface mount LEDs (SMDs). These lamps are suited to light fittings designed to have the MR16 dichroic quartz globes fitted to them. Suited for 12V and 24V systems, can be dimmed. These lamps are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

Dichroic LED replacement lamps - MR13

Dichroic LED replacement lamps - MR16

Festoon LED replacement lamps

LED festoon lamp replacements are fitted with high tech surface mount LEDs (SMDs). Available in 37mm and 42mm lengths. Suited for 12V and 24V systems, can be dimmed. These lamps are fitted with warm white (wwe) or cool white (cwe) or red (rd) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

G4 LED replacement lamps - Back Pins

G4 LED lamp replacements with rear facing pins are fitted with high tech surface mount LEDs (SMDs). The back pin G4 lamps are best suited to light fittings that were designed to have the G4 quartz globe fitted in an axial orientation, i.e. fitted with the pins going straight into the fitting, as is often the case with mini spot lights or reading lights. Suited for 12V and 24V systems, can be dimmed. These lamps are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights. The pins of these lamps are 25mm long to allow for fitment in deep, narrowly tapered lights. These pins can be shortened if considered to be excessively long by snipping them off with a pair of sidecutters.

G4 LED replacement lamps - Side Pins

G4 LED lamp replacements with side facing pins are fitted with high tech surface mount LEDs (SMDs). The side pin G4 lamps are best suited to light fittings that were designed to have the G4 quartz globe fitted in a sideward orientation, i.e. fitted with the pins going sideways into the fitting, as is often the case with Halogen down-lights. The 8SMD lamps fit into most of the small halogen down-lights with an OD of about 70mm. Lamps with more LEDs can often be fitted into such lights, however the lamp may be positioned off-centre in the light fitting. There is no technical reason why this should not be allowed, but some customers may find the eccentric light pattern to be undesirable. Suited for 12V and 24V systems, can be dimmed. These lamps are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

G4 TowerLED Replacement Lamps

G4 LED tower lamp replacements are fitted with high tech surface mount LEDs (SMDs). The tower lamps most closely mimic the light spread pattern of an incandescent G4 quartz lamp, in that the light is radiated in a 360ﾰ pattern. This makes them most suitable for light fittings where an all round radiance is important. Suited for 12V and 24V systems, can be dimmed. These towers are fitted with warm white (wwe) or cool white (cwe) LEDs. Suitable for interior lights, must be kept dry if used in exterior lights.

LED Ropelights

5m long long LED rope lights with 60 LEDs per metre. The LED's are sealed in to be waterproof. Can be cut to shorter lengths. Width 8mm, height 3mm. 12V Current draw per m 800mA 9,6W.

Bayonet base Corncob LED replacement lamps