Kemo Solar Controller 1,5ARegulators are used primarily to protect batteries from being overcharged or excessively discharged.ﾠThe range of regulators starts at a basic ﾑall charging on/all charging offﾒ through to the latest digital read-out range which also offers the scope to expand to data-log all the systemﾒs battery charging and discharging through the regulator and down-load the data to a computer. Regulators are rated according to the maximum solar charging current (amps) which they are rated to handle.ﾠ When sizing a regulator for any application, it should be voltage compatible with the batteries and capable of handling the maximum solar charging input plus 25%. The Kemo solar charging controller is a basic regulator connected between a solar cell 12V (open circuit voltage 14...22V) and a 12V battery to prevent an overcharge of the battery. Suitable for solar panels with a total output of up to 20W. LED displays for "accu full" (approx. 14V) and "charging". Includes diode to prevent discharge of battery to solar panel at night. Dimensions: 60 x 45 x 20 mm (without mounting tabs). |
|
Kemo Solar Controller 6AThe Kemo 6A solar charging controller is a basic regulator connected between a solar cell 12V (open circuit voltage 14...22V) and a 12V battery to prevent an overcharge of the battery. Suitable for solar panels with a total output of up to 60W. Charging commences when the battery voltage is below 13,4V. LED displays for "Battery full" (approx. 14.4V) and "charging". Both LED will be off when the battery is not full and no charge is being fed into the regulator. No load power consumption < 2.5 mA. Dimensions: 72 x 50 x 42 mm (without mounting tabs). |
|
Steca Solar ControllersSteca Solsum charge controllers are economical pulse-width modulated shunt controllers designed for small and mid-sized systems. Using the most up-to-date and innovative technology, the Solsum controllers fulfill the task of overcharge and over discharge protection. The overcharge protection operates as a pulse-width-modulated shunt controller and guarantees faster charging of the battery. A tri-color LED indicates three ranges of battery voltage and a green LED indicates array current. These controllers include temperature compensated charging, MOSFET transistors and fuse protection. Solsum Controllers ensure maintenance-free operation and long product life. One-year warranty. Other Features Include: ﾕ Temperature compensated overcharge and overdischarge ﾕ Automatically adjusts for 12 V or 24 V system protection ﾕ Operating temperature range is -25ﾰ C to +40ﾰ C ﾕ Protection against over temperature and- battery overvoltage. |
|
Steca Solar Controllers (No display)The Steca range of regulators adapt automatically to user behaviour and temperature conditions.They have a unique feature for a solar regulator, a self learning continual determination of the batteries state of charge, which is the data base for its regulating process. The Steca display system gives you comprehensive information about the operational status of your system, with continual display of the SOC (State of Charge) of your battery and various flashing LED sequences that indicate if the users will be disconnected or has already been disconnected. The Steca is also the first regulator to show when a system error occurs. |
|
Steca Solar Controllers (LCD display)Steca solar controlers with LCD display can not only inform you of the SOC and voltage but also your system's current. In the case of an error the display shows you clearly what kind of system error has occurred. |
|
Morningstar Sunguard Solar ControllerMorningstar's SunGuardﾙ is the world's leading single module controller. It combines all the advantages of the SunSaver charging circuit with less expensive packaging to provide an economical controller for small PV systems. Rated solar current 4,5A, for 12V systems, with temperature compensation, series design (not shunt)100%. Solid state, fully encapsulated in epoxy potting, contained in an ABS plastic, impact-resistant case. Self-consumption is 6 mA, warranty 5 years. |
|
Morningstar Sunsaver Solar ControllersMorningstar's SunSaverﾙ is the world's leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller. These are 100% solid state, series design (not shunt) controllers with a true 0 to 100% PWM duty cycle. With a setpoint accuracy to 35 mV, they are rated for 25% overloads. The circuitry is fully encapsulated in epoxy potting. The marine rated terminals and anodized case make thes controllers the idealchoice for marine use. They feature temperature compensation and selectable charge voltage - 14,1V for sealed and 14,4V for flooded batteries. Multiple units can be paralled to increase capacity to 40A or more. Green LED indicates when charging. |
|
|
|
Morningstar Prostar Solar ControllersMorningstar's ProStarﾙ is the world's leading mid-range solar controller for both professional and consumer applications. Operates 12V or 24V systems at 15A or 30A. Multiple units may be paralleled for higher currents, up to 300A. 100% solid state PWM series battery charging (not shunt) with temperature compensated charging ability in conjunction with optional temperature sensor. Very accurate control and measurement, with a 3-position battery select for gel, sealed or flooded batteries. LEDﾒs to indicate battery status and faults. Current compensated low voltage disconnect (LVD).. Coated circuit boards for high durability in marine and tropical environments. Morningstarﾒs SunSaver Duoﾙﾠ is an advanced PWM two battery controller. Rated for 25 A at 12 V, this product will charge two separate and isolated batteries at the same time, such as a "house" and an engine battery, based on user selectable priorities. |
Morningstar Tristar Solar ControllersMorningstar's TriStarﾙ is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. It can be used to regulate solar or wind power, albeit no at the seme time, ie two regulators would be required to regulate both functions. TriStarﾙ is rated at 45 or 60 As, at 12, 24 or 48 V, and fitted meters, remote meters and remote temperature sensors available as optional extras. Warranty: 5 Years. |
|
|
|
Plasmatronics PL Series Solar ControllersPlasmatronics PL Series solar controllers can operate as series switching, PWM or shunt regulators and feature full metering and data logging capabilities. This allows proper system monitoring. In addition the versatile load switch and timer allow them to function as controllers for many related applications such as lighting, heating water and refrigeration. 20, 40 or 60A charge ratings available, with 20A, 5A and 30A load current ratings respectively, at selectable voltage of 12 or 24V. Short circuit, reverse flow, reverse battery polarity and lightning protected without fuses - no blocking diode required. Low current drain (<9mA), custom alphanumeric LCD display, low battery voltage load disconnect function, tropic proofed circuitry plus many other sophisticated features. Plasmatronics is an Australian company which specialises in the design and manufacture of electronic regulating and metering devices for solar power systems. Plasmatronics regulators are all solid-state units offering the latest in advanced battery charging profiles. Plasmatronics PR solar controllers are simple two stage regulators for charging lead acid or gel batteries from photovoltaic panels. The full available charge current is allowed to flow into the battery until the batteries reach boost voltage. The unit then switches to the float mode. The PR series use a rugged power mosfet and switches the negative. The units do not contain reverse blocking diodes. |
XANTREX C-Series Solar ControllersThe XANTREX C Series charge controllers have field configurable voltage and battery set points for 12 and 24 VDC operation. All can be used as charge, diversion, or load controllers and come with a standard multi-colour charge status LED. Th C-Series controllers feature electronic protection against short-circuits, overload, over temperature and reverse polarity conditions. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Optional cumulative amp hour meters, remote cumulative amp hour meters and battery temperature sensors are available. |
|
XANTREX Maximum Power Point Tracking Solar ControllerThe Xantrex XW Solar Charge Controller is a photovoltaic charge controller that tracks the electrical maximum power point of solar panel or panels to deliver the maximum available current for charging batteries. When charging, it regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery. The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery. The XANTREX XW MPPT constantly adjusts the operating points of the panel(s) to ensure it stays on the maximum power point. It does not stop energy harvest to sweep the array like some other competing products. This feature is beneficial all sunlight conditions, especially in areas with fast moving cloud cover and quickly changing solar conditions. The ultra-reliable, convection-cooled design does not require a cooling fan ? large, aluminum, die-cast heat-sink allows full output current up to 45ﾰC without thermal derating. It includes a two-line, 16-character liquid crystal display (LCD) and four buttons for configuration and system monitoring. Input over-voltage and under-voltage protection, output over-current protection, and backfeed (reverse current) protection. Battery Temperature Sensor included ? automatically provides temperaturecompensated battery charging. Five-year warranty. |
|
back to top