Push button switch, with red rubber boot. Budget quality. Cutout d16mm, for panels up to 23mm thick. Rated 12 V 25A. Screw terminals.
Push button switch, with chromed button. Budget quality. Cutout d16mm, for panels up to 23mm thick. Rated 12 V 25A. Screw terminals.
Push button switch with black boot. Cutout d16mm. For panels up to 6mm thick. Heavy duty, rated 12V 60A or 24V 40A. Screw terminals.
Push button rubber foot switch for winches. Black plastic surround d 115mm with flip-open cover. Cutout d64mm.Rated 12/24V 200A.
Push button switch Cole Hersee with rubber boot, plastic dipped brass body with 300mm flyleads. Rated 12V10A. Cut d16, panel 12mm max, boot od25mm, protrusion 17mm, intrusion 55mm.
High quality small APEM push button switch with rubber boot, ceramic body with 6mm spade terminals.Rated 12V10A. Cutout d12, panel 8mm max, boot nut od20mm, protrusion 12 to-20mm, intrusion 28 to 20mm.
Quality push button switch Cole Hersee with brass casing and chromed button. 300mm flyleads. Rated 12V35A. Cut d16, panel 25mm max, protrusion 16mm, intrusion 65mm.
These rubber boots suit Cole Hersee push button switches 230006. Available in black and red, 3/8 32 thread. od 26mm, protrusion 19mm.
Quality Carlingswitch SP toggle switches. Nickel plated brass toggles and bushings, phenolic resin bases, 6mm spade terminals. Neoprene toggle seals. Cut d12,7mm,Panel 10mm, intrusion 26mm, body 29mmx16mm.
Miniature toggle I-I switch, ideal for switching single light fittings. Budget quality. Cutout d6mm, max protrusion 18mm, intrusion 20mm, body 7mm x 13mm, solder terminals.
Small toggle switch, typically used in dome light fittngs, with solder terminals. Budget quality. Body dimensions 33mm x 15mm, cutout d10mm, intrusion 10mm, protrusion 25mm.
Double pole Carlingswitch G Series toggle switches - variants of the F-Series single pole switches above. Body dimensions 33mm x 19mm. Other details as for single pole switches.
Black rubber toggle switch boot, budget version. The boot completely covers the actuator and has a 15/32 brass fixing thread. Fits onto the Carlingswitch toggle switches.
Black silicone toggle switch bootfor Carling toggle switches. Less susceptible to deterioration and damage than the rubber boot above. The boot completely covers the actuator and has a 15/32-32 brass fixing thread.
"Missile switch"covers for toggle switches to prevent unintended actuation. Available in carbon fibre look or bright red. Note that these are not true marine parts. Additional surface protection of metal parts recomended.
Waterproof toggle switch 0-I with O-ring stem seals & rubber boot. Plastic dipped with 200mm fly leads. Rated 12V/20A or 24V/10A. Cut d12mm, panel 7mm max.Body 33mmx21mmx30mm intrusion, protrusion 25mm.
HELLA pull switch rated 12V10A, cutout d9mm, max panel thickness 12mm, body dimensions 30mm x 21mm, intusion 33mm, protrusion 24mm.
Pull switch, brass with chromed plastic knob. Cut-out d9mm, for panels 20mm max. Screw terminals. Single & two stage switch options. Budget quality copies of the Cole Hersee switches 230034 & 230035, 12V25A.
Quality Cole Hersee 12V10A pull switches. Brass bodies with screw terminals and chrome plated brass knobs. Cutout d10, max panel 20mm & 25mm respectively. Intrusion 50mm and 74mm behind front face of panel respectively.
Quality Cole Hersee 12V10A pull switches. Brass bodies with screw terminals and chrome plated brass knobs. Cutout d10, max panel thickness 15mm. Intrusion 54mm behind front face of panel.
Push-on, push-off switch, budget quality, bedside lamp style. Cutout d10mm, max panel thickness 5mm.
HELLA rotary off-on switch, rated 12V15A. Body dimensions 30mm x 30mm, protusion 20mm, intrusion 45mm, max panel thickness 10mm.
For the engine to run, a cap attached by a lanyard to the driver is pressed onto the switch. It is stopped if he moves from the helm. NO contact to break the short to neg on magneto engines, NC contact for all other engines.
HELLA compact round rocker switches are easy to mount as they require only a d20mm hole. Snap into panels up to 6mm thick. Rated 10A 12V. 4,8mm spade terminals. Protrusion 6mm, intrusion 22mm, bezel od23mm.
In line cord mount on-off switch, white plastic, 61x30x22mm
ICole hersee heavy duty toggle switch with silver contacts, rated 12V25A.Suitable to brake wind generators. Stem d12,5mm, 4mm screw terminals.
304 stainless steel push button switches rated IP67. Alternate action latching or momentary. 12V5A Red or blue LED ring light can be used as circuit on indicator or for backlighting. Mounting hole d19mm.
Blank off covers for Carlingswitch mountings are available to allow for future expansion of panels.
Carlingswitch V-Series modular mounting panel can be stacked up to any length needed. This module fits at either end. 30 x 59 mm, cutout 26 x 49 mm, protrusion 4 mm, intrusion 26 mm
Carlingswitch V-Series modular mounting panel-Mid-section. As many as required can be fitted between 2 end sections. 26x59mm, cutout 26,2x49mm, protrusion 4mm, intrusion26mm.
Carlingswitch V-Series modular mounting panel for a single stand alone switch. Dimensions 34 x 59 mm, cutout 25 x 49 mm, protrusion 4 mm, intrusion 26 mm.
Carlingswitch V-Series modular mounting panel for the fitment of three switches. Dimensions 87 x 59 mm, cutout 78 x 49 mm, protrusion 4 mm, intrusion 26 mm.
Carlingswitch V-Series modular mounting panel for the fitment of six switches. Dimensions 164 x 59 mm, cutout 156 x 49 mm, protrusion 4 mm, intrusion 26 mm.
Seal for Carlingswitch V-Series switches, recommended for switch fitment with or without mounting panels.
This useful tool makes removal of switches from their mountings and removal of the actuators from the switch bodies easy and quick.
Contura 3 actuators have parallel bar styling. IP68, 0=off I=latching on {I}=momentary on, single/double throw, 1&2 pole, 20A/12V & 15A/24V. Optional indicator lights on latching positions.
Carlingswitch V-Series Contura 2 rocker switches feature stippled relief styling on the actuators instead of the horizontal bars on the Contura 3 acuators. Otherwise they are the same.
Carlingswitch V-Series black Contura 2 rocker switches with illuminated legend symbols or icons. Limited to the most common applications. A switch with a blank lens is available.
These two switches have green and red actuators with legends for use as start and stop switches. Note that momentary switches have no illumination.
Carlingswitch V-Series modular mounting panel can be stacked up to any length. This module is suited to fit either end. 30 x 59 mm, cutout 26 x 49 mm, protrusion 4 mm, intrusion 26 mm.
Carlingswitch V-Series modular mounting panel-Mid-section. As many as required can be fitted between 2 end sections. 26x59mm, cutout 26x49mm, protrusion 4mm, intrusion26mm.
The Carlingswitch V-Series Contura 3 rocker switches, in white have the same features as the Contura 3 black switches listed.
Micro switch with both normally open and normally closed contacts. Body dimensions 28mm x 16mm x 10mm. Terminal protrusion 9mm.