Bilge Pumps & Switches

  • RULE New Generation Small Bilge Pumps
    The RULE New Generation small bilge pumps feature compact size & a sleek new modern design to fit in the smallest places. Snap-on strainer bases facilitate easy mounting. Fully submersible, they have Ignition protected motors with stainless steel shafts. They are available in four models ranging from 360 GPH to 1100 GPH Higher flow-optimised impellers provide greater flow at the same amperage as previous model with the same rating. GPH ratings are now at 12V - rather than previous 13.2V ratings - meaning the pump will produce its rated flow at the lower voltage more typical of actual on-board voltage conditions. High efficiency, low current motors include true electromagnetic suppression to prevent radio frequency interference and 1,5mm² tin coated copper electrical wiring with a silicone infused water blocking feature. A Built-In thermal cut-out in the motor provides additional protection for pump & vessel. Straight threaded discharge ports with o-ring seals allow easier installation and maintenance. A straight, barbed discharge hose port is included with each pump, that include a removable non-return valve in which reduces the amount of water draining back from the discharge hose into the bilge. Alternative straight and 90 degree barbed ports are optionally available. Hidden air vents in the pump prevent air locking in challenging plumbing installations and help with the non-return valve operation. 3 year limited warranty.
    Part No. Description Price Quantity
    700100
    Bilge Pump Rule 12V 360GPH 24DA RWB800
    $46.90 Inc GST
    700101
    Bilge Pump Rule 12V 500GPH 25DA RWB801
    $59.90 Inc GST
    700102
    Bilge Pump Rule 12V 0800GPH 20RDA RWB803
    $69.90 Inc GST
    700104
    Bilge Pump Rule 24V 0500GPH RWB802
    $81.50 Inc GST
    700105
    Bilge Pump Rule 24V 0800GPH RWB804
    $119.90 Inc GST
    700106
    Bilge Pump Rule 24V 1100GPH RWB806
    $133.90 Inc GST
  • RULE New Generation Self-sensing Automatic Bilge Pumps
    The Automatic models of the New genaration RULE bilge pumps have smart electronics that turn on the pump briefly every 2 1/2 minutes to determine whether there is water in the bilge that is causing resistance to the impeller rotating. If the water level is 10mm or higher the pump will stay on until the water level has dropped to under 3mm. Extremely efficient, the pumps will only consume less than 0,25Ah/day for 12V pumps or 0,13Ah/day for 24V pumps. This has negligible impact on the battery charge if the batteries are topped up by a shore power charger or solar charging. Caution must be taken if there is no regular charging of the batteries, as the cumulative effect can be a battery charge depletion of as much as 8Ah/month.
    Part No. Description Price Quantity
    700111
    Bilge Pump Rule automatic sensing 12V 500GPH 25SA RWB807
    $184.50 Inc GST
    700113
    Bilge Pump Rule automatic sensing 12V 1100GPH 27SA RWB8106
    $124.90 Inc GST
    700114
    Bilge Pump Rule automatic sensing 24V 500GPH 25SA-24 RWB808
    $213.00 Inc GST
    700116
    Bilge Pump Rule automatic sensing 24V 1100GPH 27SA-24 RWB807
    $184.50 Inc GST
  • RULE Rule-Mate Automatic Bilge Pumps
    The eco-friendly Rule Mate pumps are fully automated bilge pumps featuring solid state water sensing technology to eliminate the need for separate float switches The two field effect sensors are activated when the presence of water at the sensor changes the sensor’s magnetic field. The pumps turn on when the water level reaches approximately 60mm and shut off when the water level falls below 8mm. This mechanism is eco-friendly because straight motor oil in the bilge will not activate the sensors. Rule-Mate bilge pumps have built-in programming that sense when the pump is running but not pumping water to protect the pump, vessel, and the vessel’s batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2 1/2 minutes. Once the debris is removed, the pump will revert to normal operation. The pumps includes a straight hose barb fitting with a non-return valve, a snap-on strainer base for easy cleaning and an anti-fouling impeller. Alternative straight and 90 degree outlets are available as options.
    Part No. Description Price Quantity
    700121
    Bilge Pump Rule-Mate 500 31l/min 12V RM500B RWB822
    $139.90 Inc GST
    700122
    Bilge Pump Rule-Mate 800 50l/min 12V RM800B RWB824
    $179.90 Inc GST
    700123
    Bilge Pump Rule-Mate 1100 69l/min 12V RM1100B RWB826
    $219.90 Inc GST
    700124
    Bilge Pump Rule-Mate 500 31l/min 12V RM500B-24 RWB823
    $149.90 Inc GST
    700125
    Bilge Pump Rule-Mate 800 50l/min 12V RM800B-24 RWB825
    $189.90 Inc GST
    700126
    Bilge Pump Rule-Mate 1100 69l/min 24V+ RWB8278
    $44.90 Inc GST
    700149
    Stainless steel strainer for RULE New Generation small bilge pumps 70 RWB37
    $13.85 Inc GST
    740101
    Shower sump Rule 24V800GPH+ 98-24 RWB831
    $309.00 Inc GST
  • Mounting Bracket for RULE New Generation Bilge Pumps
    Mounting bracket for mounting Rule New Generation bilge pumps to vertical surfaces.
    Part No. Description Price Quantity
    700148
    Mounting bracket for mounting Rule New generation bilge pumps to vertical surfaces RULE 66A RWB820
    $34.95 Inc GST
  • Part No. Description Price Quantity
    700150
    Bilge Pump LoPro 900GPH 12V RULE LP900D RWB5158
    $129.00 Inc GST
    700151
    Bilge Pump LoPro 900GPH 12V auto RULE LP900S RWB5159
    $169.50 Inc GST
  • RULE High Capacity Bilge Pumps
    The RULE 1500 and 2000 high capacity fully submersible bilge pumps have double insulated, dual water / air cooled motors manufactured by Rule specifically for marine pump use. The pumps are ignition protected and they won't burn out if run dry for short periods. Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule's exclusive Teflon seals combine to give total reliability and high performance. These pumps include a snap-on strainer base for easy fitting and cleaning, stainless mounting screws and a clip to secure a float switch to the pump. They require a separate float switch to operate automatically. Available in 12 volt and 24 volt versions. 3 year limited warranty.
    Part No. Description Price Quantity
    700160
    Bilge Pump 1500 GPH 12V RULE 4 RWB16
    $234.50 Inc GST
    700161
    Bilge Pump 2000 GPH 12V RULE 10 RWB13
    $299.00 Inc GST
    700162
    Bilge Pump 1500 GPH 24V RULE 3 RWB100
    $259.70 Inc GST
    700163
    Bilge Pump 2000 GPH 24V RULE 12 RWB15
    $319.00 Inc GST
  • Part No. Description Price Quantity
    700166
    Bilge Pump 12V 3700GPH RULE 14A RWB10
    $509.00 Inc GST
    700167
    Bilge Pump 24V 3700GPH RULE 16A RWB12
    $519.00 Inc GST
    700168
    Bilge Pump 12V 4000GPH RULE 56D RWB5175
    $539.00 Inc GST
  • RULE Slimline General Purpose Pump
    This handy pump can pump water or diesel, but NOT petrol. Strainer can be removed to fit inlet hose. Submersible. Not self priming. 12V 4,5A Cable 4m + alligator clips 166mm x d38mm, 9,7m head.
    Part No. Description Price Quantity
    700192
    Pump Rule Slimline 18 L/min12V13mm hose+ iL280P RWB85
    $114.90 Inc GST
  • RULE Rule-a-Matic Float Switch
    Year after year, the Rule-a-Matic® has been the switch of choice for boaters the world over. The latest design now includes a removable base for easy installation, cleaning and servicing, A mercury-free snap switch tested to over one million cycles and marine-grade blocked wire. Designed for pumps drawing up to 14 A at 12 V DC or 7A at 24V DC. Dimensions 127mm x 45mm x 70mmh. Base footprint 66 x 45mm Two-year warranty.
    Part No. Description Price Quantity
    701110
    Rule-a-Matic bilge pump switch 12V14A/24V7A RULE 35A RWB22
    $64.00 Inc GST
  • Rule-A-Matic Plus Float Switch
    Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover that protects against debris and jamming. It features 20mm² highly abrasion resistant marine grade wire and a built-in test feature. Designed for pumps drawing up to 20 A. Warranty two years. Dimensions 124mm x 64mm x 70mmh.
    Part No. Description Price Quantity
    701112
    Rule-a-Matic Plus elclosed bilge pump switch 20A RULE 40A RWB98
    $79.90 Inc GST
  • RULE SuperSwitch™ Float Switch
    Backed by a five-year warranty, the non-mercury RULE SuperSwitch™ is designed for the toughest applications. Design includes marine-grade 2mm² wire, a larger float for increased buoyancy, removable base for easy installation and servicing and a snap switch design capable of handling pumps drawing up to 20 A at 12 V DC. Warranty five-years. Dimensions 127mm x 51mm x 51mmh.
    Part No. Description Price Quantity
    701114
    SuperSwitch bilge pump switch 20A RULE 37A RWB19
    $114.80 Inc GST
  • JABSCO Hydro Air Bilge Pump Switch
    The JABSCO Hydro Air bilge pump switch, also sold as the Rule ECO-Switch, is an ecologically sound automatic bilge pump control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to the switch. The air pressure activates the switch which controls your pump. All wiring is out of the water and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches. For pumps drawing up to 20 A.
    Part No. Description Price Quantity
    701118
    Hydro Air remote air operated bilge pump switch 12V 20A JABSCO 59400-0012 J41-005
    $154.50 Inc GST
    701119
    Hydro Air remote air operated bilge pump switch 24V 10A JABSCO 59400-0024 J41-006
    $154.50 Inc GST
    740200
    Pump JABSCO diaphragm shower/bilge 12V+ 50880-1000 J40-106
    $447.00 Inc GST
  • RULE traditional Bilge Pump Control Panel
    Controls any pump equipped with an automatic float switch. Toggle has three positions [automatic, off, or manual] and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has red indicator light and fuse holder. Rated 12V 20A or 24V10A. Dimensions 83mm x 51mm.
    Part No. Description Price Quantity
    701210
    Traditional bilge pump control panel 12V RULE 41 RWB23
    $92.40 Inc GST
    701212
    Traditional bilge pump control panel 24V RULE 42 RWB24
    $99.90 Inc GST
  • RULE Contemporary Bilge Pump Control Panel
    The sleek, modern bilge pump control panels have impact-resistant, UV-stabilized plastic panels, a fuse holder and double throw rocker switches with an indicator light. They can control any pump equipped with an automatic float switch. The rocker switch has three positions [automatic, off, or manual] and has a "fail safe" spring return to "off" from the "manual" position. Rated 12V 20A or 24V10A. Dimensions 73mm x 60mm.
    Part No. Description Price Quantity
    701220
    Contemporary bilge pump control panel 12V RULE 43 RWB107
    $92.40 Inc GST
    701222
    Contemporary bilge pump control panel 24V RULE 44 RWB5188
    $116.80 Inc GST
  • RULE High-Water Bilge Alarm
    The RULE High-Water Bilge Alarm consists of a float switch and an in-dash gauge that features both a visual and audible 85 db alarm. This unit allows an unmanned compartment to be constantly monitored. For additional compartments, add additional Float Switches. Gauge fits d52mm cutout, intrusion 127mm. For float switch details see 701110.
    Part No. Description Price Quantity
    701310
    RULE High-Water bilge alarm 12V 33ALA-12V RWB104
    $189.00 Inc GST
    701312
    RULE High-Water bilge alarm 24V 32ALA-24V RWB104B
    $199.80 Inc GST