Ammeters

  • BEP Ammeters
    DC ammeters. These can also be used as replacement ammeters in BEP circuit breaker panels.71mm x 60mm, panel mount through d52mm hole.Alternatively can be mounted behind a panel, cutout 67mm x 32mm. Internal shunt for low current instruments, external shunts [to be ordered seperately] required for 50A to 150A instruments.
    Part No. Description Price Quantity
    325442
    Ammeter BEP 0-10A DC N010A -551155BEPN10A
    		$98.00 Inc GST
    325443
    Ammeter BEP 0-20A DC N020A -
    		$124.00 Inc GST
    325447
    Ammeter BEP 0-50A DC shunt reqd N050A 113436
    		$77.00 Inc GST
    325448
    Ammeter BEP 0-100A DC shunt reqd N0100A 113438
    		$87.00 Inc GST
    325449
    Ammeter BEP 0-150A DC shunt reqd N0150A 113456
    		$87.00 Inc GST
  • BEP Ammeter Shunt 50A to 150A - 50mV
    Shunts are required when using both analogue and digital ammeters. The negative supply wire is cut and shunt inserted in line. Care must be taken that all currents to be monitored pass through the shunt, it is recommended that the shunt is placed as close to the battery as practical. No negative load connections should be made on the battery side of the shunt unless those loads are specifically required not to be monitored. These 50A to 150A shunts are used with the BEP analogue ammeters but can also be used with any other 50mV ammeters of the respective ratings. Dimensions
    Part No. Description Price Quantity
    325917
    Shunt 050 A DC 50mV 50A-50MV 113450
    		$101.00 Inc GST
    325922
    Shunt 100 A DC 50mV BEP 100A-50MV 113454
    		$89.00 Inc GST
    325925
    Shunt 150 A DC 50mV BEP 150A-50MV 113456
    		$89.00 Inc GST