Battery Switches

  • BEP Contour battery switch
    The BEP 701 Contour battery switch, single circuit has an enclosed housing with removable rear and side covers and meets ABYC requirements. Can be used as a stand alone unit or interlocked together with other switches in a modular system using solid links. Can also be interlinked with a BEP VSR, allowing a powerful, yet compact, battery management system to be created. Dimensions 69mmx69mmx75mm high, fastening holes d5,5mm in 54,5mm square. Flush mountable in a 52mm cutout [protrusion 33,5mm, intrusion 41,5mm]. Studs M10 tin plated copper.
    Part No. Description Price Quantity
    201010
    Switch battery single circuit 275A/1250A BEP 701 113550
    $38.00 Inc GST
  • BEP Panel Mount Contour Battery Switch
    BEP 701-PM panel mount Contour battery switch, singlecircuit. Rated 275A continuous [1h], 455A intermittent [5min], 1250A cranking [10s]. The actuator can be removed after rotating anticlockwise 45° from the off position. The actuator also features an interchangeable labeling system, allowing a full range of applications. Dimensions 68mmx68mm, fastening holes d5,5mm in 54,5mm square, cutout 50 mm, shallow mounted protrusion 51mm, intrusion 16mm. Deep mountable in a 52mm cutout [protrusion 30,8mm, intrusion 36mm]. Studs M10 tin plated copper. Suitable for fitment to flush mounting plates and Contour Connect mounting plates. Switches can be interlinked using solid links.
    Part No. Description Price Quantity
    201011
    Switch battery single circuit panel mount 225A/1250A BEP 701-PM 113548
    $43.00 Inc GST
  • BEP 700 Easyfit Battery Switch
    The BEP 700 Easyfit battery switch is based on the BEP 701 Contour switch , but has a long threaded shaft with mounting ring to allow for fitment through panels up to 19mm thick. Can also be surface mouted, ideal replacement for most european post and lever switches. Dimensions 68mm x 68mm, overall height 110mm. Shaft d24mm.
    Part No. Description Price Quantity
    201012
    Switch battery single circuit Easyfit 225A/1250A BEP 700 113547
    $56.00 Inc GST
  • BEP 720 Heavy Duty Battery Switch
    The BEP 720 heavy duty single circuit battery switch is rated 600A continuous [1h], 800A [5min] intermittent, cranking 2500A [10s]. Can be used as a stand alone unit or interlocked together with other switches in a modular system. The actuator also features an interchangeable labeling system, allowing a full range of applications. Removable rear cover, meets ABYC requirements. Studs M12 tin plated copper. Dimensions 102mmx102mmx90mm high, fastening holes d5,5mm in 89,4mm square. Flush mountable in a 85mm cutout [protrusion 39mm, intrusion 51mm].
    Part No. Description Price Quantity
    201015
    Switch battery single circuit 600A/2500A BEP 720 113551
    $115.00 Inc GST
  • Part No. Description Price Quantity
    201016
    Switch battery single circuit PRO Installer 400A/1500A BEP 770 114082
    $82.00 Inc GST
  • Part No. Description Price Quantity
    201018
    Switch battery single circuit PRO Installer EZ Mount 400A/1500A BEP 770-EZ 114081
    $97.00 Inc GST
  • Part No. Description Price Quantity
    201116
    Switch battery 0-I dual circuit PRO Installer 400A/1500A BEP 772-DBC 114088
    $115.00 Inc GST
    201118
    Switch battery 0-I dual circuit PRO Installer EZ Mount 400A/1500A BEP 772-DBC-EZ 114089
    $130.00 Inc GST
  • BEP 701-S Contour Battery Selector Switch
    BEP 701-S Contour rotary 1/2/Both selector battery switch, similar 150101 above but in an enclosed housing with removable rear and side covers.
    Part No. Description Price Quantity
    201210
    Switch battery selector 4 position 275A BEP 701S 113557
    $62.00 Inc GST
  • BEP 701S-PM Panel Mount Battery Selector Switch
    BEP 701S-PM Contour rotary 1/2/Both selector battery switch, for panel mounting. Probably the most compact 1/2/Both switch available. Rated 200A/1000A 68mmx68mm.
    Part No. Description Price Quantity
    201211
    Switch battery selector 4 position 275A panel mount BEP 701S-PM 113553
    $60.00 Inc GST
  • BEP 721 Contour Heavy Duty Battery Selector Switch
    BEP 721 Contour rotary 1/2/Both battery selector switch, heavy duty, single pole. Rated 350A/1500A. Can padlocked in the off position. 102 x 102mm.
    Part No. Description Price Quantity
    201215
    Switch battery selector 4 position heavy duty 350A BEP 721 113556
    $113.00 Inc GST
  • Part No. Description Price Quantity
    201216
    Switch battery selector 4 position Pro Installer 400A BEP 771-S 114086
    $99.00 Inc GST
    201217
    Switch battery selector 4 position Pro Installer 400A with AFD BEP 771-SFD 114087
    $101.00 Inc GST
    201218
    Switch battery selector 4 position Pro Installer 400A BEP 771-S-EZ 114083
    $106.00 Inc GST
  • BEP 720-DP Contour Battery Switch, Heavy Duty, Double Pole
    BEP 720-DP Contour battery switch, heavy duty, double pole. Rated 400/1500A. 102mmx102mm Flush mountable in a 85mm cutout. For flush mounting plates see 150906 etc.
    Part No. Description Price Quantity
    201315
    Switch battery dual circuit 600A BEP 720-DP 113527
    $198.00 Inc GST
  • BEP Pro Installer Double Pole Battery Switch
    The BEP 770-DP is powerful new generation battery switch rated 400A/1500A with outstanding performance and features for both the installer, and end user. Three mounting options
    Part No. Description Price Quantity
    201317
    Switch battery dual circuit Pro Installer 400A BEP 770-DP 114084
    $112.00 Inc GST
  • Part No. Description Price Quantity
    201318
    Switch battery dual circuit Pro Installer EZIFIT 400A BEP 770-DP-EZ 114085
    $129.00 Inc GST
  • BEP Remote Operated Battery Switch 701-MD
    The 701-MD battery switch allows for installation of the switch very close to the battery to be remotely controlled. This reduces cable lengths and sizes, providing significant savings in expense and weight without the disadvantages of limited contact ratings and power draw of contactors. They are also ideal for remote isolation of bow and stern thrusters. They include LED status identification for the remote control switch and have manual override capability. Standby current is 12mA. With the same mounting dimensions as standard BEP 701 battery switches, they can be surface or panel mounted. Rated 275A continuous, 455A intermittent 5 minutes and 1250A for crankjing.10 seconds.
    Part No. Description Price Quantity
    201410
    Switch battery motor driven 275A BEP 701-MD 113670
    $239.00 Inc GST
  • Heavy Duty Remote Operated Battery Switch 720-MD
    The BEP720-MD Heavy Duty battery switch allows for installation of the switch very close to the battery to be remotely controlled. This reduces cable lengths and sizes, providing significant savings in expense and weight without the disadvantages of limited contact ratings and power draw of contactors. They are also ideal for remote isolation of bow and stern thrusters. They include LED status identification for the remote control switch and have manual override capability. Standby current is 12mA. With the same mounting dimensions as standard BEP 720 battery switches, they can be surface or panel mounted. Rated 600A continuous, 800A intermittent 5 minutes and 2500A for crankjing.10 seconds.
    Part No. Description Price Quantity
    201415
    Switch battery motor driven 600A BEP 720-MDO 113671
    $332.00 Inc GST
  • Spare Actuator for BEP 700/701 Switches
    Red actuator knob as supplied as standard on BEP 701 series battery switches. The actuator can be fitted and removed when it has been rotated 45 anti-clockwise from the off position.
    Part No. Description Price Quantity
    201910
    Actuator/key BEP 701 battery switch 701-KEY 113549
    $11.00 Inc GST
  • Yellow Actuator for BEP 700/701 Switches
    Yellow version of the standard actuator for the BEP 700/701 type battery switch for fitment to emergency paralleling switches in order to clearly distinguish these from other switches.
    Part No. Description Price Quantity
    201911
    Actuator/key BEP Emergency Parrallel yel 701-KEY-EP 113590
    $11.00 Inc GST
  • BEP Battery Switch Label Sets
    These BEP battery switch label sets are suited to the BEP 701 and 720 battery switches and replace the generic labels that the switches are supplied with in order to identify various circuits. The 3 label set only has House , Start and Emergency Parallel labels. The 14 label set has House, Start, Port Start, Mid Start, Starboard Start, 1, 2, Genset, Radio, Chassis, Emergency Parallel, Inverter, Bow thruster and Winch labels.
    Part No. Description Price Quantity
    201912
    Label sheet for BEP battery switches, 3 labels SET-715 113691
    $15.00 Inc GST
    201913
    Label sheet for BEP battery switches, 14 labels 713 113690
    $45.00 Inc GST
  • BEP 701 Battery Switch Mounting Plate
    BEP battery switch mounting plate for flush mounting BEP 701 series switches. Best used with the panel mount switches, although the switches with the complete Contour enclosure can also be fitted.
    Part No. Description Price Quantity
    201918
    Mounting plate BEP 1way 95x95mm BSP-1 113581
    $48.00 Inc GST
    201919
    Mounting plate BEP 3way 233x95mm BSP-3 -
    $84.00 Inc GST
  • BEP Solid Terminal Links
    BEP solid terminal links provide space saving interconnection of terminals when modular battery switches are mounted in clusters. 10mm mounting holes for BEP700/701 switches, 12mm holes for BEP720 switches.
    Part No. Description Price Quantity
    201920
    Terminal link solid BEP 42.5mm d10 708-42.5 113660
    $9.00 Inc GST
    201921
    Terminal link solid BEP 54.5mm d10 708-54.5 113661
    $13.00 Inc GST
    201922
    Terminal link solid BEP 64.5mm d10 708-64.5 113662
    $14.00 Inc GST
    201923
    Terminal link solid BEP 68.5mm d10 708-68.5 113663
    $13.00 Inc GST
    201924
    Terminal link solid BEP 62mm d12 708-62.0 113664
    $20.00 Inc GST
    201925
    Terminal link solid BEP 102mm d12 708-102 113665
    $22.00 Inc GST
    225165
    Circuit breaker Bussman in housing 080A 705-80A 113634
    $181.00 Inc GST
  • BEP Flexible Terminal Link
    BEP flexible terminal link suited to connect switch 201010 to VSR 160045.
    Part No. Description Price Quantity
    201929
    Terminal link flexible VSR 90mm d6/d10
    $1.50 Inc GST
  • BEP Pro Installer End to Side Link Bar
    This bar is suitable to link Pro Installer components end to side. Also suitable to link battery switches to offset end connections. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
    Part No. Description Price Quantity
    201930
    Link bar PI 779-LB-1-B 2 way end to end pitch 31 - 34.7mm Overall 56mm x 25mm 779-LB-1-B -
    $10.00 Inc GST
    201931
    Link bar PI 779-LB-2-B 2 way links end to side pitch 35.5-42.5mm Overall 69mm x 25mm 779-LB-2-B -
    $11.00 Inc GST
  • BEP Pro Installer Side to Side Link Bar
    These bars are suitable to link Pro Installer components side to side. Available to connect 2 to 6 components. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
    Part No. Description Price Quantity
    201932
    Link bar PI 779-LBJ-2-B 2 way side to side pitch 46-50mm Overall 74mm x 25mm 779-LBJ-2-B -
    $13.00 Inc GST
    201933
    Link bar PI 779-LBJ-3 3-way side to side Overall 123mm x 25mm 779-LBJ-3-B -
    $20.00 Inc GST
    201934
    Link bar PI 779-LBJ-4 4-way side to side Overall 172mm x 25mm 779-LBJ-4-B -
    $26.00 Inc GST
    201935
    Link bar PI 779-LBJ-5 5-way side to side Overall 221mm x 25mm 779-LBJ-5-B -
    $33.00 Inc GST
    201936
    Link bar PI 779-LBJ-6 6-way side to side Overall 270mm x 25mm 779-LBJ-6-B -
    $40.00 Inc GST
  • BEP Pro Installer Z Bus End to End Link Bar
    This bar is suitable to link two Pro Installer Z bus Bars end to end. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
    Part No. Description Price Quantity
    201937
    Link bar PI 779-LBZ-1-B links 2 Z bars end to end Overall 49mm x 12mm 779-LBZ-1-B -
    $5.00 Inc GST
  • BEP Pro Installer Z Bus to Component Link Bar
    This bar is suitable to link Pro Installer Z bus Bars to other Pro Installer bus bars, studs or fuse holders. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
    Part No. Description Price Quantity
    201938
    Link bar PI 779-LBZ-1-B links Z bar to bus or /stud Overall 53mm x 12mm 779-LBZ-2-B -
    $7.00 Inc GST