Bilge Pumps & Switches

  • Johnson Pump Bilge Mate
    The Johnson Pump Bilge Mate is a small, price-wise alternative in the submersible bilge pump family. A low-cost choice for boat owners who do not want to forsake quality, it features integral horizontal and vertical mounting pads for ease of installation.
    Part No. Description Price Quantity
    700000
    Bilge pump JOH Bilge Mate (450 gph)+ 32-1015-01 32-1015-01
    $27.00 Inc GST
  • SPX JOHNSON PUMP Cartridge Bilge Pumps
    The Johnson Pump Cartridge Bilge Pumps feature a unique design that allows the pump body to be exchanged for a complete spare part without removing the pump housing from the boat. These cartridges can also be fitted directly to most of the bases for Rule bilge pumps of similar ratings, making a substitution very easy. Available in four sizes, the L450, L550, L650 and L750. All except the L750 are supplied with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. Both a straight and a 90° smooth elbow Dura-Port plus a removable check valve are supplied as standard with these pumps. The L750 has a straight outlet integral in the housing. The Johnson Pump Cartridge pumps can be combined with an automatic switch AS888, an electronic float switch or the ULTIMA switch for automatic operation. The base of the pumps includes a connector onto which any of the Johnson Pump float switches can easily and securely be hooked to form an integral unit. The pumps can be manually operated via the bilge control panel. Although these water cooled pumps can be run dry briefly, this should be limited to a minimum to ensure long pump life.
    Part No. Description Price Quantity
    700001
    Bilge Pump JOH L450 (778 gph) 12V+ 32-1450-01 32-1450-01
    $39.00 Inc GST
    700002
    Bilge Pump JOH L550 (884 gph) 12V+ 32-1550-01 32-1550-01
    $42.00 Inc GST
    700003
    Bilge Pump JOH L650 (1000gph) 12V+ 32-1650-01 32-1650-01
    $55.00 Inc GST
    700004
    Bilge Pump JOH L750 (1180gph) 12V+ 32-1750-01 32-1750-01
    $60.00 Inc GST
    700007
    Bilge Pump JOH L650 (1000gph) 24V+ 32-1650-01-24 32-1650-01-24
    $67.00 Inc GST
    700008
    Bilge Pump JOH L750 (1180gph) 24V+ 32-1750-02 32175002
    $70.00 Inc GST
  • Mounting Bracket for Johnson Pump Cartridge Bilge Pumps
    Mounting bracket for mounting Johnson Pump cartridge bilge pumps to vertical surfaces.
    Part No. Description Price Quantity
    700009
    Bracket, side mount for JOH bilge pumps 34-900 34-900
    $15.00 Inc GST
  • JOHNSON PUMP Ultima Automatic Bilge Pumps
    The patented Ultima “field effect” sensing technology bilge switch has been integrated into the bodies of the UltimaBilge Pumps to create sleek, reliable and compact units ready to install and run for years and years of unerring service. Available in four sizes, the UltimaBilge 600, 800, 1000 and 1250. All except the 1250 GPH pump are supplied with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. Both a straight and a 90° smooth elbow 19mm [3/4”] Dura-Port are supplied as standard with these pumps. The 1250GPH pump is supplied with both 28mm [1 1/8”] and 32mm [1 ¼”] screw in discharge ports. All Ultima Bilge Pumps operate on 12V and are supplied with a removable non-return valve.
    Part No. Description Price Quantity
    700020
    Bilge Pump JOH Ultima 600GPH 12V+ 32-47258 32-47258
    $130.00 Inc GST
    700021
    Bilge Pump JOH Ultima 800GPH 12V+ 32-47259 3247259
    $135.00 Inc GST
    700022
    Bilge Pump JOH Ultima 1000GPH 12V+ 32-47260 32-47260
    $165.00 Inc GST
    700023
    Bilge Pump JOH Ultima 1250GPH 12V+ 32-47261 32-47261
    $175.00 Inc GST
  • SPX Johnson Pump Low Boy Bilge Pumps
    The Low Boy is a variant of the Johnson Pump Cartridge Bilge Pumps with removable pump bodies. This version is laid on its side, which means that it has a very low profile, ideal for fitment in shallow spaces such as under engines. Available in two sizes, the L550 LB and L750 LB. The L550 LB is supplied with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. Both a straight and a 90° smooth elbow Dura-Port plus a removable check valve are supplied as standard with this pump. The L750 LB has a straight outlet integral in the housing. The Johnson Pump Low Boy Cartridge pumps can be combined with an automatic switch AS888, an electronic float switch or the new ULTIMA switch for automatic operation. The base of the pumps includes a connector onto which any of the Johnson Pump float switches can easily and securely be hooked to form an integral unit. The pumps can be manually operated via the bilge control panel. Although these water-cooled pumps can be run dry briefly, this should be limited to a minimum to ensure long pump life.
    Part No. Description Price Quantity
    700050
    Bilge Pump JOH Low Boy L650LB12V 3233703LB01 3233703LB01
    $65.00 Inc GST
    700052
    Bilge Pump JOH Low Boy L750LB 12V 1100GPH+ 32-33103LB-01 3233103LB01
    $49.00 Inc GST
  • SPX Johnson Pump Medium Duty L1600 Bilge Pumps
    The SPX Johnson Pump high performance Medium Duty L1600 Bilge Pumps have been designed to exceed tough international commercial standards. Fully submersible, they have an open flow pumping capacity of 88l/min. Both 12V and 24V versions are available. The impeller design has been optimised to achieve lifts of up to 5m. These pumps can also be fitted directly to most of the bases for Rule bilge pumps of similar ratings, making a substitution very easy. The pumps are supplied with two screw in discharge ports of different diameter to accommodate various hose sizes. A removable check valve is supplied as standard with every pump.
    Part No. Description Price Quantity
    700062
    Bilge Pump JOH L1600 (1600gph) 12V+ 32-1600-01 32-1600-01 POR:5517768
    $140.00 Inc GST
    700063
    Bilge Pump JOH L1600 (1600gph) 24V+ 32-1600-02 32-1600-02
    $140.00 Inc GST
  • SPX Johnson Pump Heavy Duty L2200 Bilge Pumps
    The SPX Johnson Pump high performance Heavy Duty L2200 Bilge Pumps have been designed to exceed tough international commercial standards. Fully submersible, they have an open flow pumping capacity of 130l/min. Both 12V and 24V versions are available. The impeller design has been optimised to achieve lifts of up to 5m. These pumps can also be fitted directly to most of the bases for Rule bilge pumps of similar ratings, making a substitution very easy. The pumps are supplied with two screw in discharge ports of different diameter to accommodate various hose sizes. A removable non-return valve is supplied as standard with every pump.
    Part No. Description Price Quantity
    700064
    Bilge pump JOH L2200 (2060gph) 12V+ 32-2200-01 32-2200-01
    $190.00 Inc GST
    700065
    Bilge pump JOH L2200 (2060gph) 24V+ 32-2200-02 32-2200-02
    $195.00 Inc GST
  • SPX Johnson Pump Extra Heavy-Duty L4000 Bilge Pumps
    The SPX Johnson Pump high performance Extra Heavy-Duty L4000 Bilge Pumps have been designed to exceed tough international commercial standards. Fully submersible, they have an open flow pumping capacity of up to 256l/min. Both 12V and 24V versions are available. The impeller design has been optimised to achieve lifts of up to 5m. These pumps can also be fitted directly to most of the bases for Rule bilge pumps of similar ratings, making a substitution very easy. The pumps are supplied with two screw in discharge ports of different diameter to accommodate various hose sizes. A removable non-return valve is supplied as standard with every pump.
    Part No. Description Price Quantity
    700066
    Bilge pump JOH L4000 (2600gph) 12V+ 32-4000-01 32400001
    $335.00 Inc GST
    700067
    Bilge pump JOH L4000 (2600gph) 24V+ 32-4000-02 32-4000-02
    $335.00 Inc GST
  • JOHNSON PUMP Viking Universal Manual Pump
    The Johnson Pump Viking Universal hand powered diaphragm bilge pump can be horizontally or vertically mounted. With the optional thgrough deck kit it can be installed behind a bulkhead or below deck.By switching valves, the flow direction can be reversed. Includes 38mm straight and right angled Klick Tite connectors.
    Part No. Description Price Quantity
    700095
    Bilge Pump JOH Viking Universl man 38mm+ 10-13530-01 101353001
    $225.00 Inc GST
    700096
    Bilge Pump JOH Vik Univ thru deck kit 09-36250 09-36250
    $0.00 Inc GST
  • Bilge Bump pick-up/strainer
    This strainer prevents debris entering remote mounted pumps and maintains the prime in the suction pipe.
    Part No. Description Price Quantity
    700097
    Bilge pump pickup/strainer 19/25/32/38mm 09-24794 09-24794
    $37.00 Inc GST
  • SPX JOHNSON PUMP Bilge Pump Float Switch
    The SPX Johnson Pump AS888 bilge pump float switch protects bilge pumps and ensures fully automatic operation. The float housing is hinged on the mounting base. A steel ball rolls towards the hinged of the switch when the float is raised by rising bilge water, where the ball forms the contact between two electrical terminals to complete the bilge pump circuit.
    Part No. Description Price Quantity
    701100
    Switch bilge pump JOHfloat typ12/24V15A+ 34-888 34888
    $38.00 Inc GST
  • SPX Johnson Pump Electro-Magnetic Bilge Pump Switch
    The SPX Johnson Pump electro-magnetic bilge pump switch employs a magnetically activated reed switch that is controlled by a magnet located on top of a float. The float rises with rising bilge water. Air in the float housing is forced out through a vent hole at the top of the float housing. The float reaches the top of the housing when the bilge water is 50mm deep. The float magnet activates the reed switch, switching on the bilge pump. At the same time an air valve is shut, closing off the vent hole. This creates a vacuum above the float, causing it to stay in position at the top of the chamber as the level of the bilge water falls. When the bilge water has dropped down to 20mm, air enters through an opening at the bottom of the float housing, releasing the vacuum in the housing. The float drops down and the power to the pump is switched off. This switch has no moving parts apart from the float. It has been proven to be exceptionally reliable.
    Part No. Description Price Quantity
    701102
    SPX Johnson Pump electro-magnetic bilge pump float switch 12V+ 34-1900B-12V 341900B12V
    $55.00 Inc GST
    701104
    SPX Johnson Pump electronic magnetic bilge pump float switch 24V 34-1900B-24V 341900B24V
    $55.00 Inc GST
  • SPX Johnson Pump ULTIMA Bilge Switch
    The ULTIMA Bilge Switch uses two patented Mirus™ field effect detector cells. Mirus™ dector cells are composed of an active device and an electrode surrounded by a second electrode. The applied circuit creates an electric field around the cell. When a dielectric material such as bilge water interrupts the field the active device triggers a signal. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris. The sensor is very easy to mount, to either the horizontal base or against a vertical surface. ULTIMA activates at a 50 mm fluid level and deactivates at a 20 mm fluid level. An eight second delay prevents false starts. ULTIMA switch is rated to handle all Johnson Pump submersible pumps drawing up to 20 A at 12 or 24 volts. It is also used for the BilgeAlert high water alarm.
    Part No. Description Price Quantity
    701106
    SPX Johnson Pump ULTIMA electronic bilge pump switch 34-36303 3436303
    $80.00 Inc GST
  • SPX Johnson Pump Bilge Pump Control Panel
    The SPX Johnson Pump bilge pump control panel enables switching of a bilge pump, either manually, or automatically through a high water level bilge switch. The double throw rocker switch on the panel includes an indicator light. The panel includes a glass fuse holder. No fuse supplied with the panel, that must be sized as appropriate for the bilge pump fitted. Panel dimensions 73mm x 60mm, intrusion 60mm.
    Part No. Description Price Quantity
    701200
    Bilge Pump Control Panel 12V SPX Johnson Pump 34-1224 341224
    $55.00 Inc GST
    701202
    Bilge Pump Control Panel 24V SPX Johnson Pump 34-1225 J-82044R-24
    $55.00 Inc GST
  • SPX Johnson Pump Bilge-Alert Bilge Alarm
    The SPX Johnson Pump Bilge-Alert high-water bilge alarm consists of an Ultima switch and an in-dash panel that features both a visual and audible 100 db alarm that is activated after a delay of 3 seconds after being exposed to water. The double throw rocker switch on the panel allows the alarm to be armed, turned off or tested. This unit enables an unmanned compartment to be constantly monitored. For additional compartments, add additional float switches. Panel dimensions 73mm x 60mm, intrusion 60mm. For details of the Ultima high water level switch see 701106.
    Part No. Description Price Quantity
    701300
    SPX Johnson Pump Bilge-Alert bilge alarm 12V 34-72303 34-72303-001
    $175.00 Inc GST
    701302
    SPX Johnson Pump Bilge-Alert bilge alarm 24V 34-72303-24 34-72303-002
    $175.00 Inc GST
  • SPX Johnson Pump bilge Pump Cycle Counter
    Easy to read and resettable bilge pump counter. Enables you to check the frequency of bilge pump operation and head off potential issues down the road. 76mm x 64mm high, intrusion 52mm.. Requires 37mm x 24mm cutout. Plastic panel with LCD read out. One year warranty.
    Part No. Description Price Quantity
    701320
    SPX Johnson Pump Bilge pump cycle counter 12V 34-8300 34-8300
    $175.00 Inc GST