Battery Monitors

  • DCSM Systems Monitor
    The BEP DC Systems Monitor [DCSM] is a state of the art full colour monitor. It can monitor the voltage of three battery banks, plus the current [i.e. Amps] drawn or charged for the house bank plus it computes the state of charge of the house bank [Amp-hours]. The current and state of charge of a second bank of batteries can be monitored if an additional shunt is purchased. Most users just monitor the state of charge of the house bank, as the Volt reading is adequate to monitor that all is in order on start batteries. The monitor can in also be used to monitor the levels of three tanks, e.g. fuel, water, grey water or waste. The DCSM display features clear, extra large type face and options to display data graphically. This allows for more detailed on-screen information and increased clarity. The screen has back lighting for easy night time viewing. Supplied with shunt and 5m cable to connect the shunt to the instrument.
    Part No. Description Price Quantity
    327015
    DC Systems Monitor DCSM BEP 80-600-0021-00 113386
    $897.00 Inc GST
  • BEP DC Shunt 450A
    This is the shunt supplied as standard whith the BEP DCSM. It can be ordered if current [Amps] and state of charge [Amp-hours] are to be monitored for a second battery bank, or as a replacement part.
    Part No. Description Price Quantity
    327017
    Shunt 450 A DC 50mV for DCSM additional or spare part BEP LB-450-50 113457
    $174.00 Inc GST
  • Upgrade Kit BEP Marine 600-DCM to DCSM
    Kit to upgrade panels previously fitted with BEP Matrix 600-DCM to the current DCSM. Includes DCSM instrument and template for reworking the mounting plate on the BEP panel, but no shunt or cable, as the shunt and cable from the 600-DCM can be carried over to the DCSM.
    Part No. Description Price Quantity
    327018
    Upgrade kit 600-DCM to DCSM, incl instrument & template, no shunt, no cable BEP 600-DCSM-KIT 113383
    $930.00 Inc GST
  • Interface Module for BEP Tank Level Monitor
    Electronic interface module that allows tank level sensors with 10 to 180 Ohm or 240-33Ohm impedance to be used with the BEP DCSM syatem monitors.
    Part No. Description Price Quantity
    327019
    Tank level sensor interface module BEP+ 600-TLM-SIF 113396
    $108.00 Inc GST
  • Cable for BEP DCSM Monitor
    Shileded twisted pair cable for connecting the BEP DCSM to the shunt. Available in 5m and 10m lengths. The DCSM is supplied as standard with the 5m long cable.
    Part No. Description Price Quantity
    327022
    Cable shielded twisted pair for DCSM monitor 05m BEP 600-DCM-5M 113403
    $73.00 Inc GST
    327023
    Cable shielded twisted pair for DCSM monitor 10m BEP 600-DCM-10M 113405
    $122.00 Inc GST